Miller Spectrum 875 Plasma Cutter with XT60 Torch with 20-ft. Cable

Features

• The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.
• The fastest plasma torch and work cable connection and removal in the industry.
• Factory ready CNC/Automation models are available in long or short body torches as well as retrofit kits to convert hand held machines to be capable of CNC/Automation cutting.
• Work cable and clamp make for fast and easy setup and storage. The new ultra flexible Quick Connect work lead comes with a smaller heavy duty clamp.
• Provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.
• Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components. Fan-On-Demand cooling system operates only when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit
• The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting and gouging performance.
• Use with generator power at or above 10 kW (e.g. Bobcat™) or equivalent competitive equipment.

Includes

• Spectrum 875
• XT60 hand-held torch with 20-ft. (6 m) cable. Includes a complete set of 60 A consumables.
• Heavy-duty work clamp and flexible cable with quick connect
• 10-ft. (3 m) power cord
• Extra consumables

Does Not Include

• Weld leads
• Air source (compressor or bottled gas)
• Personal safety products (safety glasses, gloves)

Specifications

• Country of Origin: United States
• Length: 18.75
• Width: 8.75
• Height: 13.5
• Weight: 49
• Display Max Thickness - Mild Steel: 7/8 in. (22.2 mm)
• Capability Gouging: True
• Recommended Generator Power: 11000
• Travel Speed - Mild Steel (IPM): 15
• Rated Output at 104 degrees F: 208 V: 60 A at 140 VDC, 40% duty cycle; 230 VDC: 60 A at 140 VDC, 50% duty cycle
• Max Thickness - Mild Steel - in: 0.88
• Metal Type: Mild Steel|Stainless Steel|Aluminum
• Travel Speed - Stainless Steel (IPM): 15
• Travel Speed - Aluminum (IPM): 15
• Display Max Thickness - Stainless Steel: 7/8 in. (22.2 mm)
• Display Max Thickness - Aluminum: 5/8 in. (15.9 mm)
• Max Thickness - Stainless Steel - in: 0.88
• Max Thickness - Aluminum - in: 0.63
• Input Voltage: 208 V|220/230/240 V
• Input Hz: 50/60 Hz

Downloads

Spec Sheet
CSA Cert 1
CSA Cert 2